OM3 2xLC-SC 10m Vaata suuremalt

DNS Optika patchcord OM3, 50/125, 2xLC-SC, 10m

200448

Uus toode

DNS Patch cord is made of two parallel sections of multimode fiber optic cable with a lengths of 1, 2, 3, 5, 10 and 15 meter, terminated on one side with two LC connectors and on other side with two SC connectors.

Rohkem infot

Rohkem infot

DNS Patch cord is made of two parallel sections of multimode fiber optic cable with a lengths of 1, 2, 3 and 5 meter, terminated on two LC connectors and on other side with two SC connectors. Connectors feature simple matching (push-pull coupling with a snap) and rectangular cross-section allowing dense packing of the connectors on the panel.

The optical fiber used in the patch cord is OM3. It provides full compatibility with existing fiber-optic networks based on multimode fibers. The average fiber attenuation is 3.5 dB/km at 850 nm and 1.5 dB/km at 1310 nm. The optical fiber is reinforced by aramid fibers (Kevlar) and covered with PVC sheath.

FEATURES

  • Kevlar reinforced
  • Comes in standard with 2mm outer jacket.
  • All connectors are equipped with zirconia ferruls and conform to TIA/EIA568.3, Bellcore GR-02
  • Testprotocol comes with each item.
  • Bending radius: 30 mm

 

 Ordering information

Code Description Length
201106 DNS OM3 2xLC-SC, 50/125 1 m
201107 DNS OM3 2xLC-SC, 50/125 2 m
200125 DNS OM3 2xLC-SC, 50/125 3 m
200126 DNS OM3 2xLC-SC, 50/125 5 m
200448 DNS OM3 2xLC-SC, 50/125 10 m
200447 DNS OM3 2xLC-SC, 50/125 15 m

Subject to change without notice

Kommentaarid

Hetkel pole ühtegi ülevaadet

Kirjutage oma ülevaade

DNS Optika patchcord OM3, 50/125, 2xLC-SC, 10m

DNS Optika patchcord OM3, 50/125, 2xLC-SC, 10m

DNS Patch cord is made of two parallel sections of multimode fiber optic cable with a lengths of 1, 2, 3, 5, 10 and 15 meter, terminated on one side with two LC connectors and on other side with two SC connectors.

Samas kategoorias on veel 30 toodet :